alt Hacker NewsFor everyone struggling with clothes sizing and having a hacker mindset, I can't recommend enough buying a sewing machine (~100EUR on a used market, ~150 new gets you a reasonable starter one you won't outgrow any time soon) and giving clothes alterations a try.
Finding a tailor that understands you / you agree with is an option too, if time is a hard limit (though I'm not sure it's altogrther that much quicker).
In my case, I started with tailors, but kept running into small misunderstandings. Also, my taste keeps evolving.
Start small with simple stuff, ideally old / second hand cheap clothes. Shirts, T-Shirts and bodice waistlines / "darts" are almost trivial once you can follow a straight line. First one will take a while, second will be much quicker, by third / fourth it's almost a routine and you can start iterating on your own preferences. They likely "will" evolve as you keep wearing the altered clothes.
Depending on how much help you can get in the beginning, with maybe a 2-3h intro on how to use a sewing machine done by a friend who has sewing as a hobby, I'm pretty sure most people should be able to get their first alterations done within 4-5h. By second or third attempt, this time should be down to around 1h per item, including some setup (pinning - trying - ironing). At that point the DIY option is probably quicker than going to a tailor.
Replies
I keep coming cross these videos on youtube from Cornelius Quiring, and it's been making me think about trying it out. If anyone is looking for videos about drafting patterns for clothing, I think he's stuff seems pretty approachable!
I also fixed clothing sizes for my family using a hacker mindset, but in a different way:
Did you know that most professional sewing charts are just DXF files?
And did you know that DXF is the most common file format for laser cutters?
;)
=> just let the machine cut out precisely the clothing shapes that you need
After a few tries, I also started to add small sideways cuts to the outlines as alignment markers. And then you just need to connect the pieces where you marked them while always leaving roughly 0.5 cm of gap to the laser cut line. I went with 0.5 because my sewing machine has a hardware alignment guide with that offset. And at that point, it takes a skilled tailor only mere minutes to finish a shirt, which means in exchange for their 1x hourly rate they will be willing to finish off 5x proto t-shirts for you.