alt Hacker News> The best case latency is higher than doing the work at interrupt level
One approach is to do everything in ISRs, a la RTIC. That requires efficient, vectored, nested, tail-chained, base priority-ed interrupt silicon, and a lot of it, but it is feasible and elegant where this exists, such as Cortex NVIC. Emerging RISC-V devices with xCLIC (ch32v, gd32v, newer ESP32 and others) are potentially even better.
I really appreciate that the author took the time to add the Embassy vs RTIC addendum.
Replies
> One approach is to do everything in ISRs, a la RTIC.
That only works for really simple systems. On more complex systems there is a pretty good chance you will end up with locked up hardware if your ISR is long enough. Interrupts need servicing to keep the data flowing, prioritization is a job for the OS, not the hardware.
How would it handle kernel/user space if everything runs inside ISR context ?
FWIW, just having a mask in the interrupt controller is normally enough to give you the same thing at the cost of a dozen or so cycles in the critical path. Basically you just keep a mask per priority that can be built up cheaply at init time (or even compile time if you're cute about it), you apply the appropriate mask in the interrupt prologues and epilogues, and pretty much as soon as you apply the new mask in the prologue you go ahead and acknowledge the interrupt.