This LED star PCB was 95% generated by Codex: https://www.youtube.com/shorts/8a52LjovhcE

Was non-trivial (e.g. days and days of cumulative work) but worked with Codex to build up a parametric generator where I could adjust the star size, number of rings, leds per ring. It did all the LED-to-LED routing, panel layout with mouse bites, placed decoupling caps. At the time Codex wasn't as good at spatial reasoning, I expect that Astra would do this much faster.

4 x layer PCB with GND and 5V inner layers. WS2816B LEDs (not available in strips yet). 3D printed a frame so that two stars could be opposite each other (video shows only one side). ESP32 S3 on a 3.3v to 5v shifter board sandwiched in between. ESP32 wifi antenna pokes through and sits on a keep out section. Received control signals from a central controller via ESP Now.