alt Hacker NewsLove how the 5 PCBs slot into each other to form the final shape.
With respect to the assembly: do yourself a massive favor and let the PCB fab also assemble the LEDs. With a simple bill of materials like this it will add very little cost, it saves you a _lot_ of time, and it might also reduce the chance of component damage from adding too much heat or from accidental ESD strikes. (I don’t know how much these Neopixels can handle, though.)
Replies
scoot • today at 8:48 AM
> do yourself a massive favor and let the PCB fab also assemble the LEDs
From the article:
What's next? ...using PCB assembly...
asdfasdfe • today at 11:45 AM
I don't agree with this. The board and components are trivial to hand solder.
I'll bet there's some creative board layout so that the relevant controller IC and supporting passives can be soldered onto the back of one of the 5, then have solder jumpers or some such to actually connect it into the circuit. That way, you're not adding miles of unused trace to an active bus.
Of course, having a 5x PCB fab, but 4x+1 assembly would probably double the cost for a single turn of the device.
I would love to hear more about the process of making 5-fold symmetry work for board layout. That sounds maddening to get right.