When I was a kid I learned that the CRT screen refresh rate must be set to at least 60Hz otherwise it looks like crap and is pain to look at. My cousin had his set to some lower value and would claim not so see any issue. His father said "I don't know how these damn kids stare all day long at the screen, I stare half an hour and I get a headache!" because you're one setting away from not having the headache but you won't let me change it because reasons.
My parents have a plasma TV and I can clearly see it flicker, although it doesn't cause any pain.
I had a ViewSonic 17PS-2 that had a 43 Hz interlaced “masochism” mode. I have no idea when that would have been actually useful.
Back when desktop PCs were more common things to find in livingrooms, I improved so many lives by increasing the refresh rate of the monitor.
Sometimes, people didn't notice the issue and wondered why I was so motivated to fix a thing that they didn't perceive, but they noticed a positive improvement 100% of the time I spent a few minutes finding a good refresh rate and adjusting the geometry.
---
That said: Phosphor persistence varied, and therefore so did the the impact of refresh rates. So even though I was tuned into the thing, I never noticed any issues at all when working with a DEC VT330 terminal; the image was not flickery at all despite its 60Hz refresh rate. It accomplished this by using phosphors of relatively long persistence.
There was some ghosting evident on rapidly-scrolling text, but it worked well-enough for its normal intended uses.
Same with the Samsung CGA monitor I had back in the day. It's not like I could adjust its 60Hz refresh rate, but it was fine.
Things were far worse at 60Hz on the SVGA ViewSonic 5e that replaced the CGA kit. I spent a fair bit of time dialing out the 60Hz graphics modes in MS-DOS. (Text was always OK: VGA text mode is 70Hz.)