Also flicker on bad LED lighting. A lot of bad LED lighting flickers at ~60Hz. In rooms lit by that, you can wave your hand or a thin object back and forth, and if you look carefully, you can perceive a "shutter" effect where you're only seeing the snapshots of its position where the light is on.
The thing that makes that so insidious is that not everybody can easily perceive that.
(The reason why such flicker is common in cheap LED bulbs: they turn AC into DC using a half-wave rectifier, which just chops off half the AC wave. This is also why you can still see the effect in rooms lit by multiple lights, because the flicker is in sync, synchronized to the incoming AC.)
If you are building a space for other people and you are responsible for the lighting, please check for this. If you can't perceive it yourself, find someone who can.
Not everybody can see this, but, if you want to help someone see PWM sources, choose a single color (e.g., red, largely in case the primaries are time separated), make a simple dot or line, and wave it around in the peripheral vision of your doubter.
Humans are very sensitive to flicker in peripheral vision. Have them look at something across the room and then blow their mind.
(Note: easier with a phone, but doable with a laptop.)
When I've had a coffee too much, I notice the 120 Hz flicker even more. But even when I'm tired and don't, my mood still noticeably increases when I leave flickery spaces. (I sometimes test my hunch with the slow-motion cam as I am leaving.) I've tried looking for studies to prove or disprove my experience. They should be easy to find, right? Humanity is replacing the entire planet's lighting with LEDs after all! Comment sections have been busy with people arguing about PWM flicker for years, probably longer. What is the best study you can find? For me, it is always the one from 1989 about pre-LED 60 Hz office lighting (that said it had adverse effects). Seriously...?
I wish I was a Bitcoin billionaire, for many reasons, but doing another study on flickery LED lighting seems like the lowest-hanging fruit of our entire civilization. I live in a country that is regulated to hell and back, and yet even our street lights flicker visibly, not to mention classrooms, children's bedrooms, and the screens that people stare at for hours every day. I don't get it.
There are tools that will report the flicker level of lights. Or a basic test that often works is pointing your phone camera at a light, close up, sometimes will show the flicker, or using the slow-mo setting on the camera.
Yes I can perceive that really well, I don't even need to wave my hand for it.
> In rooms lit by that, you can wave your hand or a thin object back and forth, and if you look carefully, you can perceive a "shutter" effect where you're only seeing the snapshots of its position where the light is on.
Heh, this is how I test these lamps as well. Also my camera has anti-flicker shutter which can detect it to thwart it by syncing the shutter release with flicker itself. It shows a warning when it detects is, as well.
60Hz flicker is rare. Most cheap/driverless LEDs are full-wave rectified or at least alternate half-wave pixels and thus flicker at twice the mains frequency, giving 120Hz in the US.
The power supply is the weak point in LED room lighting. The best power supply for LEDs is switch-mode PWM, high frequency, and with thermal management designed by an engineer who understands therodynamics.
Unfortunately all those things are expensive so you rarely find such bulbs in the cheap bin at Home Depot.
reading the sibling comments in this thread show how complicated we’ve collectively made it to buy something as stupid as a lightbulb.
> If you can't perceive it yourself, find someone who can.
Or just use your phone’s slo-mo feature to take a 240 FPS video (which then gets played back at 30 FPS). 60 Hz flicker becomes extremely visible. More than once I’ve noticed the strobe effect and then confirmed it this way.