logoalt Hacker News

eastbound • yesterday at 6:49 PM • 3 replies • view on HN

> China has high voltage lines from their western deserts to eastern cities,

Long lines are AC, they must come from dams or coal generators, still with a huge loss. Solar is DC. It can be transformed at a loss.


Replies

tzs • yesterday at 9:06 PM

China's ultra high voltage grid is DC for long distance transfer from remote western and northern hubs to eastern cities. This uses 24 long lines with 1 at 1100 kV and the rest at 800 kV. It has about 40000 km of lines.

They also have 20+ ultra high voltage AC lines (1000 kV) for shorter region interconnects.

Historically long transmission lines were AC because long lines have to be high voltage to reduce losses¹. Boosting AC voltage for high voltage transmission can be done with a transformer. DC requires more complicated equipment which wasn't really commercially feasible until early this century.

¹Losses are proportional to current. Power is current x voltage. To transmit a given amount of power the higher the voltage the lower the current, and hence the lower the losses.

➕ show 1 reply
Edman274 • yesterday at 9:09 PM

Look up the Xizang-to-Guangdong UHVDC Project. The whole project build out will have a transmission capacity of 10 gigawatts and has lines stretching from Tibet to Hong Kong.

bluGill • yesterday at 7:04 PM

Long lines are often DC. Talk to an electrical engineer for details, but for long distances DC works better. For distances at the scale of a US state works great, but as you get longer distances DC becomes better again.

➕ show 1 reply