logoalt Hacker News

Brian_K_White • yesterday at 8:18 PM • 0 replies • view on HN

Fxtec phone has a super genius power management circuit that requires battery power to activate the charging circuit to accept power from usb.

If the battery ever once goes low enough, it can never be charged again. Even with a charger plugged in, it just ignores it. Long press reset does wake it up but it just immediately shuts itself off again and the battery does not get charged from the usb power.

This actually happened to some people while their new unit was sitting in warehouses before shipping.

The fix (unofficial and unintentional, users discovered it) is to plug in a charger, get a short thick rubber band such as from broccoli, wrap it around the waist to hold the power button down continuously, and just leave it that way long-press boot-looping overnight.

The the long-press detector does trigger and the circuit does wake up and get power from the usb port for about 1 second, then shuts off again and waits for the long-press time again (15 seconds or so).

Every time it wakes up for 1 second, the battery gets a teeny tiny bit of charge. After 4-8 hours it accumulates enough for the power management circuit to work normally and turn itself on and charge normally the rest of the way.

You know it's gone far enough and you can remove the rubber band when you see the power-on boot logo (or anything at all) on the screen during a loop. Until then the screen never shows anything, just the notification led comes on for about a second once per loop.