I love ATtinys. They are in a sweet-spot where you have a set of features with which you get stuff done while still being able to keep the whole architecture in your head.
You can memorize the whole instruction set and write assembly if you wish, but can also program C, C++ and even Rust now. The tooling is accessable and the chips are cheap and easily sourced.
I once used a bitbanged USB on a t85 and thought it was barely possible, but this is another level. Impressive!
Oh that brighten my mood. When I was in between jobs, I bought a bunch of ATTiny13A with similar specs and was genuinly surprised how much power such a little device has, given its ridiculously low energy consumption. I had zero HW experience prior to that, so to educate myself I started to implement firmware from scratch in zig, and advanced from UART to SPI to I²C and ended up on USB implementation, which I didn't finish because I got hired.
> Update 2014-01-07:
> It actually works on a ATtiny 10 now, yay!...
>
> Update 2014-03-19:
> I published a more detailed write-up...
>
> Source: https://github.com/cpldcpu/u-wire
---
> Flash: 988 of 1024 bytes used (96.4%)
> SRAM: 28 (variables)+2 (stack) of 32 bytes used (93.8%)
>
> This is most likely the most complex firmware ever loaded into an ATtiny10!
>
> Source: https://cpldcpu.com/2014/03/19/%c2%b5-wire-usb-on-an-attiny-10
It felt like it was devalued by a sorrowful LLM/AI, but no… The person achieved the whole code manually.Considering recent times… This is an authentic, real achievement that may inspire and support someone else and is to be kept treasured in the history with genuine glory, honor, and dignity.
Thank you… Thank you heartfelt for being an actual engineer, developer with authentic experience to be actually proud of, and held up as an example!
(2014)
[flagged]
In a similar vein: bit-banging Ethernet on an ATTINY85 by the genius that is CNLohr: https://www.youtube.com/watch?v=mwcvElQS-hM