logoalt Hacker News

jotux • today at 4:50 PM • 2 replies • view on HN

Cool coincidence. In a past job, I specifically made replacement PCMCIA cards for these (and other) planes. Instead of making cards with a controller and onboard storage, we made cards with an FPGA/microcontroller and a microSD card soldered to the PCB. We did this specifically because these aircraft use (at least partially) broken implementations of the PCMCIA protocol, and we'd update the bus protocol per aircraft to work around the limitations. None of these planes can just go buy stuff off the street because some large portion just doesn't work because their protocol isn't fully implemented and isn't flexible to deal with variance in timing/speed/etc.

A fun story: Our cards had whatever industrial-spec microSD card we could find (16GB, 32GB, etc.), and we'd internally limit the disk size to whatever the platform needed. Almost every aircraft had some specific number of MB they wanted because all of their CONOPS listed it, and they didn't want to update documentation or software to put a different number there. We had a plane that could only use EXACTLY 128MB, but they were currently using 256MB cards and partitioning them to 128MB. We updated the disk size to present as 128MB so they could skip this step, and they specifically told us to put it back to 256MB because they didn't want to update the commissioning process to remove the partitioning step.

It was rewarding work, and the card we designed was cheap (~$500 each, which is literally nothing for major platforms like this) and 100% US-designed and made (with the exception of ICs manufactured in the usual places). Still, the procedural and cultural practices of these program offices made it a real struggle to get traction and deploy them widely. Government acquisition is just generally designed around funding primes for current development and then paying through the nose for sustainment later. It was hard to design something for widespread sustainment use because by the time you were done and ready for production, a bunch of parts would be obsolete. Then you'd have to rev the design over and over. We were never allowed to stockpile anything, even if it was trivially cheap, to facilitate production later.


Replies

jacquesm • today at 5:21 PM

This sounds so wasteful.

➕ show 2 replies
criddell • today at 4:53 PM

> We were never allowed to stockpile anything

Now allowed by whom? Was it a business decision or a regulation?

➕ show 2 replies