I'm glad that this is bringing attention to flicker sensitivity.
Here are some other things that people are sensitive to: - CRI on white LEDs (and flourencents). CRI is how clean the spectrum is in comparison to the sun or a incandescent bulb, where the specturm is completely even. There are some CRI >=95 LEDs that are fine for most people however.
- Motion blur Motion blur on LCDs (such as ~50% of Nintendo Switch 2s) can hurt eyes trying to keep track of what is going on.
+1 on the attention. There are probably so many humans around the world (I'd estimate in the millions easily, assuming this affects even 1% of the population) who get eye strain and headaches from their oled devices (or even "modern" LEDs! Brake lights are terrible!) but never realize the cause.
Btw for anyone wondering, recent "Chinese" phones appear to do a damn good job. I have a recent BBK device, and I run eye comfort mode on 24/7, and despite being hyper sensitive to pwm (my previous oled phone was bad), this is quite comfortable.
Sorry for the Amazon link (non-affiliate); it’s where I buy them. High CRI, dimmable, and so far so good, for me:
PHILIPS LED A19 Ultra Definition Soft White Light Bulbs, 4-Pack 800 Lumen, 2700K, Dimmable, Flicker-Free, 60 W Equivalent, CRI95 True Colors, EyeComfort Technology
https://www.amazon.com/LED-Definition-Flicker-Free-Equivalen...
I also have some 75 W and 100 W equivalents, but they get pretty pricey, at least in Bezosland.
On the other end is motion stutter on OLEDs. Because of sample-and-hold, the blur goes away but the image stutters on slow moving scenes instead. If your eyes are sensitive to PWM (mine are) it's quite annoying to watch OLED movement as well.
I was building a lego set with my son several years ago and at some point (after the sun went down) realized I could no longer distinguish between the green and grey pieces, though it had been obvious under natural light. It was a striking demonstration of CRI.
Agreed. A couple years ago I got a fancy 4k LG OLED monitor (32GS95UE-B, with the improved subpixel layout), and had to return it two days later. My eyes were literally red from strain, which is how I learned I'm likely PWM flicker sensitive (and that too has only a slight 240hz flicker according to rtings).
Now I go purely for IPS and make sure it's flicker-free. I'm really glad the new MBP screens are an extra and not the new default yet.
Color rendering with LEDs is so terrible. And buying proper lights is either close to illegal (e.g. halogens) for efficiency reasons, or high quality LEDs are almost impossible to buy - "call us for quote" and similar nonsense.
The absolutely worst were the default indoor lights in Australia. There must have been some giant shipment of worst possible lights that they purchased to light up every bathroom in the country.
This world wide transition to cheap LEDs stole a lot of joy from the world.
Also flicker on bad LED lighting. A lot of bad LED lighting flickers at ~60Hz. In rooms lit by that, you can wave your hand or a thin object back and forth, and if you look carefully, you can perceive a "shutter" effect where you're only seeing the snapshots of its position where the light is on.
The thing that makes that so insidious is that not everybody can easily perceive that.
(The reason why such flicker is common in cheap LED bulbs: they turn AC into DC using a half-wave rectifier, which just chops off half the AC wave. This is also why you can still see the effect in rooms lit by multiple lights, because the flicker is in sync, synchronized to the incoming AC.)
If you are building a space for other people and you are responsible for the lighting, please check for this. If you can't perceive it yourself, find someone who can.