I went on a backpacking tour. My aim was to take a lot of pictures, but I didn't want to carry a laptop. So my SD card backup setup was: a Raspberry Pi clone, a card reader, a 500G Sandisk USB3 external NVMe disk the size of a credit card and the thickness of maybe 3 credit cards and a power bank.
The backup routine was:
1. Plug the card to the card reader, plug it into one of the USB3 ports of the Pi.
2. Plug the NVMe disk into another USB3 port.
3. Power the contraption from my USB powerbank.
4. Plug the phone to the Pi on another USB port. Enable network sharing over USB.
5. Connect Bluetooth keyboard to the phone.
6. Open a terminal on the phone,
7. Find out the IP address of the Pi that the phone's DHCP server gave
8. SSH into the Pi.
9. Run rsync to copy files from the SD card to the NVMe disk (luckily the Linux distro auto-mounts the USB storage devices).
After all that's done I can plug the NVMe disk straight to my phone to browse the images...
I've been thinking of creating a Pi distro that creates a WiFi network, and use a Jenkins-like web UI so I can just plug everything in and control the procedure from the phone's browser. One day..!
So, why not a USB hub and use the phone to copy from card reader to NVME? Or even simpler, just the NVME and put the card directly into the phone?
No powerbank, no Raspberry clone, no card reader, no networking, no ssh.
Out of curiosity wouldn't it have been possible to do the same with a small four port USB-C hub plugged into an android phone? And then plug two things into the USB-C hub, a microsd-to-usb reader and the USB3 external NVME drive. This would allow for the full set of CLI file system manipulation tools and things like rsync to be run on the mounted filesystem of the SD card and/or the NVME drive, assuming installation of something like termux.
On a daily basis very easy to use an android GUI file management application to copy or move all the files from the microSD card to the NVME storage, doing a bulk select and then 'move' to mounted destination. Or write a tiny shell script that can run in termux that moves all new files that don't exist in the NVME drive destination.
If I were doing this and I had some reasonable level of confidence in the wifi where I was staying temporarily, I'd try to set up a script to periodically do an incremental back up from the mounted filesystem of the NVME drive to a small fileserver that lives in my home office, via VPN.
I've looked into this kind of thing maybe 5 years ago, and there were some (expensive) devices meant for ingesting SD cards onto SSDs (either internal or USB). Some just had buttons, and some had small screens with status etc. I think there there were some with wifi portals for management. Now it looks like there are are more cheaper options that are for a more general audience.
Question: is there a reason that you couldn't skip the pi and just use a USB-C hub and your phone to copy from the reader to a SSD? pre USB-C I did this but it was kludgy using apple's "camera connection kit".